Skip to content
Glossary

What Is a Rivet?

A rivet is a small metal fastener that holds pieces of gutter material together. It joins parts through holes and stays in place after a tool sets it. In a downspout, a rivet can hold a joint between a straight section and a bent section called an elbow.

Quick Facts About Rivet

Category
Metal fastener
Used for
Downspout joints
Typical tool
Rivet tool
Often discussed with
Downspout Repair

Key Takeaways About Rivet

  • A set rivet has no screw threads.
  • A loose joint may need a fresh fastener.
  • A rivet holds parts together but doesn't seal leaks.

How Rivet Works

A man in a hat fastens a metal gutter section with a drill on a wooden workbench

A rivet grips the material around a hole. A rivet tool pulls a thin pin through the fastener. This pull expands the back of the rivet against the metal.

Related glossary terms: Downspout, Downspout Elbow, Downspout Strap.

The rivet head rests on the outer face of the joint. The expanded back holds against the inside face. The pin breaks away as the tool sets the rivet.

A downspout elbow is a bent piece that guides water around a corner. Its end fits inside the next downspout piece. A rivet helps keep those parts from shifting apart.

The hole and rivet need to fit each other. A poor fit can leave the joint loose. The metal around the hole also needs to be sound enough to hold the fastener.

A person fastens a white metal gutter section with a hand rivet tool at a workbench outdoors

From the AGM Gutters team

When we repair a downspout, we check the joint for loose metal around the rivet. We look at how the elbow fits before we secure it. A worn hole may need attention before the joint can hold firmly.

Rivet in Practice: A Real-World Example

A downspout elbow has come loose from the pipe near your wall. During the repair, a rivet secures the fitted joint so the elbow stays in place.

Related Terms

Downspout

A downspout is a pipe that carries rainwater from a roof gutter to the ground.

Downspout Elbow

A downspout elbow is a bent fitting that changes the path of water in a gutter drain pipe.

Downspout Strap

A downspout strap is a strip of material that holds a downspout against a building.

Gutter Sealant

Gutter sealant is a water-resistant material that seals gaps in a gutter system.

AGM Gutters

Have Questions About Rivet?

Contact AGM Gutters for practical guidance on Rivet and related gutter installation work in Arkansas.

(501) 381-2607