Skip to content

What to Check If New Gutters Do Not Drain Properly

New gutters that don't drain may have a slope, outlet or downspout problem. AGM Gutters checks the water path and the gutter's fit to identify the cause.

Get a Free Estimate

What are the warning signs of a gutter drainage problem?

New gutter problems can show up as standing water or overflow. Sagging and water behind the gutter are also warning signs.

Standing water remains in the gutter after rain.
Overflow spills over the front edge.
Water behind the gutter runs between it and the house.
A sagging gutter looks uneven from the ground.
A downspout has little or no flow during rain.

Each sign can point to a different part of the system. We trace the water path before choosing a fix.

Why is water standing in new gutters?

Standing water in new gutters can point to a low spot, poor slope or debris. We check the gutter's alignment before deciding what needs repair.

Gutter slope is the slight tilt that guides water toward the outlet. We look for low spots where water may collect. We also check the gutter hangers (the parts that hold the gutter in place) for support.

Debris can slow water before it reaches the outlet. We check for a blockage as well as a problem with the gutter's fit. Clearing debris may help, but it won't fix a low spot.

Why do new gutters overflow?

New gutters can overflow when water can't reach the outlet or when roof water misses the gutter. We check where the water spills before choosing a fix.

A blocked outlet can hold back roof runoff until it spills over the front. We check the gutter outlet and the path into the downspout. If water runs behind the gutter, we also check how the gutter sits below the roof edge.

The spill location helps us choose what to check. An outlet blockage calls for a different fix than poor gutter placement.

Why isn't a new downspout draining?

A new downspout may not drain if its outlet, elbow or discharge path is blocked. We check the water path to locate the blockage.

A hand holds a paper by a gutter, with a level, screwdriver, and metal gutter pieces on a concrete surface

The downspout elbow is a bent section that changes the water's direction. We check it and the outlet for debris. We also check where water leaves the downspout for a blocked path.

A blocked downspout may need clearing. If the parts don't fit or direct water well, we can assess whether Downspout Installation needs to be changed.

When should you check new gutters?

New gutters need a ground-level check at handoff and observation after rain. Ongoing checks can reveal changes in drainage.

When What to check
At handoff Look from the ground for visible dips or sagging.
After rain Watch for overflow and check where the downspout releases water.
Ongoing Watch for visible debris and changes in drainage.

Ground-level checks can show where a problem starts. We can check the parts you can't safely see from the ground.

What should you do when new gutters don't drain?

You can note where water collects or spills and take photos from the ground. We check the gutter system and explain the repair needed.

Don't climb a ladder to inspect the gutter. We handle the ladder work and check the gutter's fit, slope and water path. We can explain whether the issue calls for clearing or a gutter repair.

Our Seamless Gutter Installation service covers new gutter systems. Contact AGM Gutters to discuss the signs you've seen and request an estimate.

Get a Free Estimate

What Are the Key Specifications to Know?

Topic Focus
What to Check If New Gutters Do Not Drain Properly
Related Core Service
Seamless Gutter Installation
Evaluation Method
On-Site Inspection & Written Scope
Compliance Standard
Local Building Code & Manufacturer Specs
(501) 381-2607